Model Number

Kobi 250

Biodiesel maker capacity 250lt/ batch ,500lt/batch,1000 lt/batch

This unit is composed of two parts within itself. At the buttom part, there is a mixing tank. In this tank, vegetable oil and metoxit are mixed 1.5 hours at 60°C. At the upper part, necessary water is being warehoused to wash biodiesel that is formed. By the way, the temperature of the water increases to 50°C until biodiesel is formed. As you know, hot water dissolves waxes in biodiesel better than the others. And this increases the quality of biodiesel. Washing pump is run when the washing procedure is started. Sprey is run with pump pressure and better quality surface contact of biodiesel and water is performed. Then this hot water gains an insight into all biodiesel. As you know, washing procedure is one of the most important criteria for biodiesel. If biodiesel is not washed well, it may easily damage your car because of the waxes in biodiesel.

Technical Data:

1-KOBI-M 250

250lt reactor

Capacity of biodiesel: 250lt/batch (one batch is 8hours)

Crome mixing pump: 1HP

Washing pump: 0.5 HP

Sprey system

Electricity panel

Digital thermo control system: 100°C

Heater thermo control system: 6000 watt

Voltage: 110/220/380V

2- KOBI-M 500

500lt reactor

Capacity of biodiesel: 550lt/batch (one batch is 8 hours)

Crome mixing pump: 1HP

Washing pump: 0.5 HP

Sprey system